Ge Fanuc

• Delivery Time: 9 to 10 working days
• Packaging Details: factory packing

The GE Fanuc IC693CPU350-DG is a single-slot CPU module, part of the Series 90-30 PLC system. It features a 25 MHz processor (80386EX), 32KB of user memory, and supports a variety of communication protocols like SNP/SNP-X slave, and Ethernet. 

• Delivery Time: 10 TO 12 WORKING DAYS
• Packaging Details: FACTORY PACKING

The ABB S202-D6 is a miniature circuit breaker (MCB) from the System Pro M Compact S200 series. It's a 2-pole (2P) device with a D-curve tripping characteristic, rated for 6 amps (6A). It's designed for overload and short-circuit protection in electrical circuits, particularly in commercial and industrial settings. 

• Delivery Time: 10 TO 12 WORKING DAYS
• Packaging Details: FACTORY PACKING

It is designed to be used as part of a complete Versamax I/O or PLC system in commercial or industrial automation applications. The IC200ALG240 analog input module is an intelligent input module that can accept input from as many as 8 different analog devices. It can also provide 16-bit input data.

• Delivery Time: 9 TO 10 WORKING DAYS
• Packaging Details: Factory packing

The 1746-IA16 is an Allen-Bradley SLC 500 Digital AC Input Module. It's a 16-channel module designed to interface with 120V AC voltage levels and is part of the SLC 500 series of programmable logic controllers (PLCs). This module is used to receive and process digital AC input signals from discrete devices in a process. 

• Delivery Time: 10 TO 12 WORKING DAYS
• Packaging Details: FACTORY PACKING

The IC695PMM335-AF is a multi-axis motion controller module for the Emerson PACSystems RX3i series, designed for high-performance servo motion control. It allows control of up to four servo axes plus additional virtual axes, supporting position, velocity, and torque loops with high-speed update rates. The module features built-in I/O, including general purpose and high-speed inputs/outputs, and supports features like synchronization and CAM profiles

• Delivery Time: 10 TO 12 WORKING DAYS
• Packaging Details: FACTORY PACKING

The IC200MDL940 is a GE Fanuc/Emerson VersaMax 16-point Form A relay output module with individual isolation for each point. It is designed for industrial control applications and can switch both AC (up to 265V) and DC (up to 125V) loads. Each point is rated for a maximum of 2 amps under typical AC and low DC voltage conditions, and it features fixed coil relays with silver contacts. 

• Delivery Time: 10 to 12 working days
• Packaging Details: factory packing

The IC694MDL645 is a 16-point, 24 VDC digital input module for the GE Fanuc (Emerson) PACSystem RX3i series, featuring positive/negative logic and 16 LEDs for status indication. It connects field devices like switches and buttons to a PLC, allowing them to interface with a wider system and supporting a 0-30 VDC input voltage range. This low-voltage module can be installed in any I/O slot of an RX3i system. 

• Delivery Time: 10 to 12 working days
• Packaging Details: factory packing

The GE Fanuc IC697CMM742 is an Ethernet interface module for the Series 90-70 PLC, designed to provide high-speed TCP/IP communication with an Ethernet network. It has one 10BaseT port, one 10Base2 port, and one 15-pin AUI port for connecting to various media, along with RS-232 and RS-485 serial ports

• Delivery Time: 10 to 12 working days
• Packaging Details: factory packing

The IC695PNC001-AK is a PACSystems PROFINET Controller Module from Emerson's RX3i series that enables a PACSystems RX3i controller to communicate on a high-speed PROFINET network. This specific revision (-AK) is one of several available revisions for the base IC695PNC001 module. It supports PROFINET Version 2.2, connects to a LAN with up to 64 I/O devices, and includes features like a Micro USB port for setup and diagnostics

• Delivery Time: 10 to 12 working days
• Packaging Details: factory packing

Fanuc A16B-2200-0900 MAIN CPU board. Fitted on Fanuc series 16-MA, 16-PA and other 16A control variants. This main card / masterboard can have many SMD modules plugged in which dictate what type of 16A it is. As well as storing the system memory, ladder, and programs. The 16A main is fitted on controls with reference: A02B-0100-B515, A02B-0120-B531, etc.

• Delivery Time: 9 to 10 working days
• Packaging Details: factory packing

The GE Fanuc / Emerson Automation IC695CHS012 is a PACSystem RX3i universal backplane. This backplane features 12-slots of high-speed controller base, supporting PCI and serial bus. This backplane supports hot swapping of modules power consumption of 600 mA @ 3.3 VDC and 240 mA @ 5 VDC.

• Delivery Time: 9 to 10 working days
• Packaging Details: factory packing

• Part Number: A06B-6140-H011
• Description: Alpha i Power Supply Module MDL AiPS- 11
• Product Series: A06B-6140
• Availability: In stock
• Core Exchange: Required
• Repair: YesThis power supply module A06B-6140-H011 Alpha Fanuc is at your disposal. FANUC αi PS 11 range, category : αi PS series.

  Input: 200-240V, 49A, 50.60Hz, 3-ph. Output: 283-339V, 13.2kW

  This Alpha Fanuc A06B-6140-H011 power supply module is sold with a warranty.

  Reconditioned power supply and tested under full load (test duration) on FANUC bench

• Delivery Time: 9 to 10 working days
• Packaging Details: factory packing

Nominal Rated Voltage48 volts DCInput Voltage Range:38 to 56 volts DCInput Power:50 W at full powerLoad Capacity:30 WattsLocation on Baseplates:  Leftmost SlotCommunication:RS 485 Serial Port
The GE Fanuc IC693PWR331 is a High Capacity power supply. This Series 90-30 unit runs off DC input. It has a 30 watt wide range and is designed for 24 VDC nominal inputs. If used in applications that demand more than +5V current capacity than provided by the standard supply, the IC693PWR331 power supply will allow all 30 watts to be consumed from its +5 V output.  The unit accepts an input voltage range from 2 VDC to 30 VDC and is capable of maintaining all outputs within specifications with input voltages as low as 2 VDC. That being said, the power supply will not start with initial input voltages less than 8 VDC. Three different outputs are available from this supply. The smallest is +5 VDC output. The other two are +24 VDC. One of these is +24VDC Relay power outputs, which supplies power Series 90-30 Output Relay module circuits. The last is Isolated +24 VDC. Typically, this power is used internally by some modules; however, it may also supply external power to 24 VDC Input modules.

• Delivery Time: 9 TO 10 WORKING DAYS
• Packaging Details: FACTORY PACKING

The IC200ALG264 is a 15-Channel, 15-Bit, Current Analog Input Module manufactured by GE Fanuc for its Versamax Series. It provides interface to 15 current inputs and receives power from the backplane power supply. Analog inputs for this particular module are single-ended, and all of them share a common return. The IC200ALG264 is 250 VAC continuous duty.

• Delivery Time: 9 to 10 working days
• Packaging Details: factory packing

The IC200CHS003 is a connector-style I/O carrier rack from the GE Fanuc Emerson Versamax product line, used for mounting a single input/output module. It provides a 36-pin connector for I/O cables, a 32-point terminal block for I/O points, and four connections for common power. Key specifications include a current rating of 2 amps per point and 8 amps for power/ground, and a maximum voltage of 264 VAC. 

• Delivery Time: 10 to 12 working days
• Packaging Details: factory packing

The IC755CSS15CDA is a 15-inch QuickPanel+ Operator Interface (OI) from Emerson/GE Fanuc, featuring a 15-inch projected capacitive multi-touch display with an SVGA resolution of 1024×7681024 cross 7681024×768. It runs on Microsoft Windows Embedded Compact 7, is powered by a 1GHz Freescale i.MX535 processor, and includes dual Ethernet, RS232/RS485 serial ports, and USB connectivity.

• Delivery Time: 10 TO 12 WORKING DAYS
• Packaging Details: FACTORY PACKING

The IC695CPE310 is a GE Fanuc RX3i CPE310 controller or CPU module that features a 1.1 GHz processor, 10 MB of user memory, and multiple communication interfaces like Ethernet and two serial ports (RS-232 and RS-485). It is designed for real-time industrial control and supports various programming languages and protocols including Modbus, SNP, and SRTP.  

• Delivery Time: 10 TO 12 WORKING DAYS
• Packaging Details: FACTORY PACKING