Power Modules

spare part*** SINAMICS G120 PM240 Power Module with integrated filter class A with integrated braking chopper 380-480 V 3 AC +10/-10% 47-63 Hz power high 

• Item Code: 6SL3224-0BE24-0AA0
• Production Capacity: 380-480 V 3 AC
• Delivery Time: 10 TO 12 WORKING DAYS
• Packaging Details: FACTORY PACKING

SIMATIC DP, Connection plug for PROFIBUS up to 12 Mbit/s with inclined cable outlet, 15.8x 54x 39.5 mm (WxHxD), terminating resistor with isolating function, With PG receptacle

Progmable Logic Controller Module 878 Point 24V DC Source Output Module1762 I/O is suitable for use in an industrial environment when installed in accordance with these instructions. Specifically, this equipment is intended for use in clean, dry environments (Pollution degree 2(1)) and to circuits not exceeding Over Voltage Category II(2) (IEC 60664-1).(3

• Delivery Time: 10 t 12 working days
• Packaging Details: factory packing

The product described by part number 6DD1607-0CA1 is a SIMATIC S7-400 EXM 438-1 I/O extension module for FM 458, featuring 4x analog outputs with 16-bit resolution. It's not a spare part compatible with EXM 438. This module is an active product and part of the EXM 438-1 input/output expansion family. 

• Delivery Time: 10 TO 12 WORKING DAYS
• Packaging Details: FACTORY PACKING

• Delivery Time: 10 to 12 working days
• Packaging Details: factory packing

Product Description. Analog Output, 13 Bit Current, 8 Channel. The IC200ALG326 is an 8-channel, 13-Bit Current, Analog Output module from the GE Fanuc Versamax Series. The single-ended channels of the IC200ALG326 are all in one group. The analog output module offers eight 4 mA to 20 mA analog current-sourcing outputs.

• Delivery Time: 9 to 10 woking days
• Packaging Details: factory packing

The default range is 4 to 20 mA with user data scaled so that 4 mA corresponds to a count of 0 and 20 mA corresponds to a count of 32000. The other ranges are selected by changing the configuration parameters using the IC641 configurator software or the Hand-Held Programmer. The range can be configured so that the input range is 0 to 20 mA with user data scaled so that 0 mA corresponds to a count of 0 and 20 mA corresponds to a count of 32000. Full 12-bit resolution is available over the 4 to 20 and 0 to 20 mA ranges. A 4 to 20 mA Enhanced range can also be selected. When this range is selected, 0 mA corresponds to a count of –8000, 4 mA corresponds to a count of 0 (zero) and 20 mA corresponds to a count of +32000. The Enhanced range uses the same hardware as the 0 to 20 mA range but automatically provides 4 to 20 mA range scaling with the exception that negative digital values are provided to the user for input current levels between 4 mA and 0 mA. This gives you the capability of selecting a low alarm limit that detects when the input current falls from 4 mA to 0 mA, which provides for open-wire fault detection in 4 to 20 mA applications. High and Low alarm limits are available on all ranges. Ranges can be configured on a per channe

• Delivery Time: 8 TO 9 WORKING DAYS
• Packaging Details: FACTORY PACKING

IC200MDL640 is a 24 VDC Positive Negative Logic Input Module with 16 Points manufactured by GE Fanuc for the VersaMax series. The IC200MDL640 provides two sets of 8 discrete inputs and 16 bits of discrete input data. Inputs in each set can be either positive logic or negative logic. Positive logic inputs receive current from input devices and return the current on the common. Negative-logic inputs, on the other hand, receive current from the common and return current to the input device. Input devices are linked between the common terminals and the input terminals

• Delivery Time: 9 TO 10 WORKING DAYS
• Packaging Details: FACTORY PACKING

• Delivery Time: 9 TO 10 WORKING DAYS
• Packaging Details: FACTORY PACKING

SINAMICS POWER MODULE PM240-2 WITHOUT FILTER WITH BUILT IN BRAKING CHOPPER 3AC380-480V +10/-10% 47-63HZ OUTPUT HIGH OVERLOAD: 7,5KW FOR 200% 3S,150% 57S,100% 240S AMBIENT TEMP -10 TO +50 DEG C OUTPUT LOW OVERLOAD: 11KW FOR 150% 3S,110% 57S,100% 240S AMBIENT TEMP -10 TO +40 DEG C 355 X 140 X 165 (HXWXD), FSC PROTECTION IP20 WITHOUT CONTROL UNIT AND PANEL APPROVED FOR CU FIRMWARE- VERSION V4.6

• Item Code: 6SL32101PE227UL0
• Production Capacity: CHOPPER 3AC380-480V +10/-10% 47-63HZ OUTPUT HIGH OVERLOAD: 7,5KW FOR 200% 3S,150% 57S
• Delivery Time: 10 TO 12 WORKING DAYS
• Packaging Details: FACTORY PACKING

The Siemens 6SE6400-1PB00-0AA0 is a PROFIBUS DP module for Siemens Micromaster 4 series drives, enabling communication within a PROFIBUS network. It's specifically designed to work with the MICROMASTER 4 series, including both MM4 FX and GX variants. This module provides a robust way to connect to PROFIBUS networks

• Delivery Time: 10 TO 12 WORKING DAYS
• Packaging Details: FACTORY PACKING

 SINAMICS S120 converter Power Module PM340 input: 380-480 V 3AC, 50/60 Hz output: 3AC 10 A (4.0 kW) type of construction: blocksize frame size FSB with built-in line filter internal air cooling

• Item Code: 6SL32101SE210AA0
• Production Capacity: SINAMICS S120 converter Power Module PM340 input: 380-480 V 3AC, 50/60 Hz output: 3AC 10 A (4.0 kW) type of construction
• Delivery Time: 10 TO 12 WORKING DAYS
• Packaging Details: FACTORY PACKING

Product type designation ET 200SP, DQ 16x 24 V DC/0.5 A ST, PU 1 Firmware version V1.0 ● FW update possible Yes usable BaseUnits BU type A0 Color code for module-specific color identification plate CC0

• Delivery Time: 10 TO 12 WORKING DAYS
• Packaging Details: FACTORY PACKING

We deal in LCD Power Modules.

Get the best price for Power Modules.   Description. CA-888 LCD Power Universal Window Control Module Super Display LED LCD TV Power Supply Module Board 15-24 Inch 12-18V CA 888 LED TV Power Supply ...

• Production Capacity: 5
• Delivery Time: 15 max working days
• Packaging Details: Single box and carton, standard export packing

Our integrated circuits and reference designs enable you to build analog input modules with high-channel density, high common-mode voltages and out-ruling miswiring protection.