Servo Motor And Drive

Reference MR-J2S-70A

This MITSUBISHI servo aomplifier, reference MR-J2S-70A is an AC servo drive. It belongs to the MELSERVO-J2-Super range.

0,75kW Mitsubishi AC servo drive for HC-KFS73, HC-MFS73 and HC-UFS72 servo motors.

This MR-J2S-70A servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs.

• Delivery Time: 9 to 10 working days
• Packaging Details: factory packing

Allen-Bradley® catalog item 1756-IF16K from Rockwell Automation® is a ControlLogix analog input module with 16 points. It has 16 single-ended inputs and is current and voltage and conformal coated.
Topic Page
Summary of Changes 2
I/O Module Overview 3
AC Digital I/O Modules 5
DC Digital I/O Modules 43
Safety I/O Modules 125The power consumption of the 1756-IF16 module is 2.3 Watts and it has a total backplane power of 2.33 Watts. The input range is ± 10 Volts, from 0 to 10 Volts, 0 to 5 Volts, or 0 to 20 mA. The current draw of this module at 5.1 Volts is 150 mA, or is 65 mA at 24 Volts.
Contact I/O Modules 141
Analog I/O Modules 147
HART I/O Modules 193
Compute Modules 211
Specialty I/O Modules 215
ControlLogix I/O Accessories 239

• Delivery Time: 9 TO 10 WORKING DAYS
• Packaging Details: FACTORY PACKING

To prevent an electric shock, always connect the protective earth (PE) terminal ( ) of the servo amplifier to the protective earth (PE) of the control box. 2. Connect the diode in the correct direction. If it is connected reversely, the servo amplifier will be faulty and will not output signals, disabling the emergency stop (EMG) and other protective circuits. 3. The emergency stop switch (normally closed contact) must be installed. 4. CN1A, CN1B, CN2 and CN3 have the same shape. Wrong connection of the connectors will lead to a fault. 5. The sum of currents that flow in the external relays should be 80mA max. If it exceeds 80mA, externally supply 24VDC 10%, 200mA power for the interface. 200mA is a value applicable when all I/O signals are used. Reducing the number of I/O points decreases the current capacity. Refer to the current necessary for the interface described in section 3.6.2. Connect the external

• Delivery Time: 10 to 12 working days
• Packaging Details: factory packing

The Mitsubishi Electric MR-J4-200B is a 2 kW servo amplifier designed for AC servo motors. It operates on a single-phase 200-240 V power supply and features a built-in dynamic brake and regenerative resistor. The amplifier also includes SSCNET III/H communication for integration with other systems. 

• Delivery Time: 10 TO 12 WORKING DAYS
• Packaging Details: FACTORY PACKING

The Mitsubishi Electric MR-J4-700B is a servo amplifier, part of the MELSERVO-J4 series, designed for AC servo drives. It's a 3-phase servo amplifier with a rated capacity of 7 kW. The product is compact, with dimensions of 300mm (height), 172mm (width), and 200mm (depth). It utilizes a single-phase 200-240V power supply and features communication through SSCNET

• Delivery Time: 10 TO 12 WORKING DAYS
• Packaging Details: FACTORY PACKING

The Kuka KSD1-32 is a servo drive module specifically designed for use with Kuka KR C2 robot control systems. It features Pentium microprocessor technology, bus-based communication, and a compact design with IP 54 protection classification. The KSD1-32 has a rated current of 16 Arms, a maximum acceleration current of 32 Arms, and a standstill current of 17 Arms.

• Item Code: KSD1-32
• Production Capacity: The KSD1-32 has an output current of 20 Amps, an output power of 300W, and an input voltage of 380V
• Delivery Time: 10 TO 12 WORKING DAYS
• Packaging Details: DIRECT FACTORY PACKING