BRT Enterprises
Navadhi, Hosur, Krishnagiri, Tamil Nadu
GST No. 33BPNPR5147E1ZQ
Call 0804764043684% Response Rate
Send E-mail
| Minimum Order Quantity | 1 Piece |
| Mounting Type | DIN Rail |
| Output Type | Analog |
| Brand | BECKHOFF |
| Usage/Application | PLC |
| Number of Inputs | 9 Digits |
| Technical data | EL6731 |
|---|---|
| Technology | PROFIBUS master/slave terminal |
| Cycle time | differing DP cycle times per slave are possible using the CDL concept |
| Fieldbus | PROFIBUS DP (standard), PROFIBUS DP-V1 (Cl. 1+2: acyclic services, alarms), DP-V2, PROFIBUS MC (equidistant) |
| Number of fieldbus channels | 1 |
| Minimum Order Quantity | 1 Piece |
| Output Type | Digital |
| Mounting Type | DIN Rail |
| Brand | BECKHOFF |
| Usage/Application | PLC |
| Number of Inputs | 9 Digits |
Special features:
| Minimum Order Quantity | 1 Piece |
| Output Type | Digital |
| Mounting Type | DIN Rail |
| Brand | BECHKOFF |
| Usage/Application | PLC |
| Number of Inputs | 9 Digits |
| Minimum Order Quantity | 1 Piece |
| Mounting Type | DIN Rail |
| Brand | BECKHOFF |
| Output Type | Digital |
| Usage/Application | PLC |
| Number of Inputs | 9 Digits |
| Number of inputs | 2 |
| Power supply | via the E-bus |
| Technology | 2-, 3-wire (default setting: 3-wire) |
| Distributed clocks | – |
| Input filter limit frequency | typ. 1 kHz |
| Sensor types | Pt100, Pt200, Pt500, Pt1000, Ni100, Ni120, Ni1000, resistance measurement (e.g. potentiometer, 10 Ω…1/4 kΩ), KTY sensors (types see documentation) |
| Connection method | 2- or 3-wire (default: 2-wire) |
| Conversion time | approx. 85 ms default setting, 2…800 ms configurable |
| Measuring current | < 0.5 mA (load-dependent) |
| Temperature range | -200…+850 °C (Pt sensors); -60…+250 °C (Ni sensors) |
| Resolution | 0.1 °C per digit |
| Measurement error/ uncertainty | < ±0.5 °C for Pt sensors |
| Electrical isolation | 500 V (E-bus/signal voltage) |
| Current consumption power contacts | – |
| Current consumption E-bus | typ. 190 mA |
| Bit width in the process image | 2 x 32 bit RTD input |
| Special features | integrated digital filter, limit value monitoring, variable connection technology |
| Weight | approx. 60 g |
| Operating/storage temperature | -25…+60 °C/-40…+85 °C |
| Relative humidity | 95 %, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP20/variable |
| Pluggable wiring | for all ESxxxx terminals |
| Approvals/markings | CE, UL, ATEX, IECEx |
| Ex marking | ATEX: II 3 G Ex nA IIC T4 Gc IECEx: Ex ec IIC T4 Gc |
| Minimum Order Quantity | 1 Piece |
| Output Type | Digital |
| Mounting Type | DIN Rail |
| Brand | beckhoff |
| Usage/Application | PLC |
| Number of Inputs | 9 Digits |
| Technology | PROFIBUS master/slave terminal |
| Cycle time | differing DP cycle times per slave are possible using the CDL concept |
| Fieldbus | PROFIBUS DP (standard), PROFIBUS DP-V1 (Cl. 1+2: acyclic services, alarms), DP-V2, PROFIBUS MC (equidistant) |
| Number of fieldbus channels | 1 |
| Data transfer rates | 9.6 kbaud…12 Mbaud |
| Interfaces | 1 x D-sub socket, 9-pin, galvanically decoupled |
| Bus device | max. 125 slaves with up to 244 bytes input, output, parameter, configuration or diagnostic data per slave |
| Hardware diagnostics | status LEDs |
| Distributed clocks | yes |
| Bit width in the process image | total max.: 1.4 kbyte input and 1.4 kbyte output data |
| Current consumption power contacts | – |
| Current consumption E-bus | typ. 200 mA |
| Weight | approx. 70 g |
| Operating/storage temperature | -25…+60 °C/-40…+85 °C |
| Relative humidity | 95 %, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP20/variable |
| Ex marking | ATEX: II 3 G Ex nA IIC T4 Gc IECEx: Ex ec IIC T4 Gc |
| Approvals/markings | CE, UL, ATEX, IECEx |
| Minimum Order Quantity | 1 Piece |
| Output Type | Digital |
| Mounting Type | DIN Rail |
| Brand | beckhoff |
| Usage/Application | PLC |
| Number of Inputs | 9 Digits |
| Technical data | EK1110 |
|---|---|
| Task within EtherCAT system | conversion of the E-bus signals to 100BASE-TX Ethernet for extension of the EtherCAT network |
| Data transfer medium | Ethernet/EtherCAT cable (min. Cat.5), shielded |
| Distance between stations | 100 m (100BASE-TX) |
| Protocol | any EtherCAT protocol |
| Delay | approx. 1 µs |
| Data transfer rates | 100 Mbit/s |
| Configuration | not required |
| Bus interface | 1 x RJ45 |
| Power supply | from E-bus |
| Current consumption E-bus | typ. 130 mA |
| Electrical isolation | 500 V (supply voltage/Ethernet) |
| Weight | approx. 50 g |
| Operating/storage temperature | -25…+60 °C/-40…+85 °C |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Relative humidity | 95 %, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| Protect. rating/installation pos. | IP20/variable |
| Approvals/markings | CE, UL, ATEX, IECEx |
| Ex marking | ATEX: II 3 G Ex nA IIC T4 Gc IECEx: Ex ec IIC T4 Gc |
| Minimum Order Quantity | 1 Piece |
| Output Type | Digital |
| Mounting Type | DIN Rail |
| Brand | BECKHOFF |
| Usage/Application | PLC |
| Number of Inputs | 9 Digits |